The Hytera driver uses a different VID/PID. Uninstall all other USB-to-serial drivers temporarily, install Hytera driver first, then reinstall others. Use a dedicated USB hub for Hytera programming. 7. The FTDI Chip Factor: Why Some Cables Matter Not all programming cables are created equal. Genuine Hytera programming cables (part numbers like PC38 or PC48 ) use an FTDI (Future Technology Devices International) chipset. FTDI chips have excellent driver support.

Without the correct driver, your PC will not recognize your radio. Programming software (CPS) will fail to connect, firmware updates will be impossible, and you may be left staring at an "Unknown Device" error in Device Manager.

A: Most Hytera radios require being turned OFF when first connecting the USB cable. After connection, turn the radio on, then press "Read" in CPS.

Click "Finish." You may be prompted to restart your PC. It is recommended to restart, even if not asked, to finalize the driver registry keys.

Right-click the installer file and select Run as Administrator . This ensures the driver files are written to the protected System32 folder.

In the world of professional two-way radio communications, Hytera is a dominant global brand, known for its robust DMR (Digital Mobile Radio) and analog systems. Whether you are a security manager, a first responder, or a radio hobbyist, at some point you will need to connect your Hytera radio to a computer. That critical bridge is the Hytera USB Driver .

Click "Next" through the typical wizard. Note the default installation path (usually C:\Program Files (x86)\Hytera\USB Driver ).