for (int angle = 180; angle >= 0; angle--) myServo.write(angle); delay(15);
#include <Servo.h> Servo myServo; const int servoPin = 9; // PWM-capable pin Emax Es08ma Ii Datasheet
The ES08MA II is analog, so do not use a refresh rate higher than 70Hz. The Arduino Servo library defaults to 50Hz, which is perfect. Part 10: Troubleshooting Common Issues Based on user reports and Emax support bulletins, here are solutions to frequent problems: for (int angle = 180; angle >= 0; angle--) myServo
| Parameter | Value | |-----------|-------| | | Emax ES08MA II | | Type | Micro Analog Servo | | Gear Material | Metal (Brass & Aluminum combination) | | Weight | 12.5g ± 0.2g | | Dimensions | 23 x 12.2 x 24 mm (0.91 x 0.48 x 0.94 in) | | Operating Voltage | 4.8V to 6.0V (6.0V recommended for max torque) | | Stall Torque (4.8V) | 1.6 kg·cm (22.2 oz·in) | | Stall Torque (6.0V) | 2.0 kg·cm (27.7 oz·in) | | Operating Speed (4.8V) | 0.12 sec/60° | | Operating Speed (6.0V) | 0.10 sec/60° | | Dead Band Width | ≤5 μs | | Temperature Range | -20°C to +60°C | | Connector Type | JR (Futaba compatible – 3-pin 0.1” spacing) | | Wire Length | 250 mm ±10 mm | It’s not the strongest or fastest, but it
The ES08MA II offers the best price-to-performance ratio for mid-range torque applications. It’s not the strongest or fastest, but it is the most reliable in its price bracket. Part 9: Programming Example – Arduino Control For those integrating the servo into a DIY project, here is a minimal Arduino example using the built-in Servo library.