Arduino Sensor Shield V5 0 Manual -

void setup() Serial.begin(9600); pinMode(trigPin, OUTPUT); pinMode(echoPin, INPUT); myservo.attach(10); // Servo is on pin 10 (SERVO1)

This manual will serve as your complete reference guide. We will cover the hardware overview, the pin-by-pin breakdown, power management, common troubleshooting issues, and a step-by-step example project. The Sensor Shield V5.0 is a passive expansion board designed specifically for the Arduino Uno R3 (as well as the Arduino Leonardo and similar form factors). It sits directly on top of your Arduino, stacking via the standard headers. arduino sensor shield v5 0 manual

The reset button on the shield should align perfectly with the reset button on the Arduino. The USB port on the Arduino should stick out the "short side" of the shield. void setup() Serial

You are prototyping a robot, building a weather station, or teaching a class. Do not use it if: You are building the final, compact product, or you need high-current motor control. It sits directly on top of your Arduino,